31 December 2003 Use of ray tracing in wave-optical engineering
Author Affiliations +
Proceedings Volume 5182, Wave-Optical Systems Engineering II; (2003); doi: 10.1117/12.511644
Event: Optical Science and Technology, SPIE's 48th Annual Meeting, 2003, San Diego, California, United States
Abstract
In wave-optical engineering the propagation of light through optical elements can be simulated using different physical approximations. Independent of the used approximation it is necessary to have full access to the complete wave information (for example the amplitude, phase and polarization) everywhere in the optical system. This means if geometric optics approximation (ray tracing) should be used in wave-optical engineering it must be possible to reconstruct the complex amplitude from the rays after a ray tracing step. Therefore it is also necessary to convert the complex amplitude of a wave into rays before the beginning of the ray tracing. For the reconstruction of the complex amplitude typically interpolation techniques must be used. To make ray tracing in wave-optical engineering practicable efficient interpolation techniques are required. The authors will discuss the conversion of a complex amplitude into rays and vise versa. The use of geometric optics approximation together with other approximations of the wave propagations for the analysis and the design of optical systems will be demonstrated.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hagen Schimmel, Sven Buehling, Frank Wyrowski, "Use of ray tracing in wave-optical engineering", Proc. SPIE 5182, Wave-Optical Systems Engineering II, (31 December 2003); doi: 10.1117/12.511644; http://dx.doi.org/10.1117/12.511644
PROCEEDINGS
9 PAGES


SHARE
KEYWORDS
Beam shaping

Ray tracing

Wave propagation

Geometrical optics

Optical design

Spherical lenses

Optical components

RELATED CONTENT


Back to Top