Paper
16 October 2003 The effect of weave orientation on the BRDF of tarp samples
Author Affiliations +
Abstract
The results of bi-directional reflectance distribution function (BRDF) measurements of four tarp samples obtained from NASA’s Stennis Space Center (SSC) are presented. The measurements were performed in the Diffuser Calibration Facility (DCaF) at NASA’s Goddard Space Flight Center (GSFC). The samples are of similar material structure but different reflectance. The experimental data were obtained with a Xe arc lamp/monochromator light source as well as laser light sources in the ultraviolet, visible, and near infrared spectral regions. The BRDF data were recorded at four incident zenith angles and at five incident azimuth angles. The dependence of the measured BRDF on weave orientation was analyzed and presented. 8 degree irectional/hemispherical reflectance data were also measured for each tarp sample, and those results are also reported. All results are NIST traceable through calibrated standard plates. The specular and diffuse scatter data obtained from these studies are used by NASA’s SSC in their field-based, vicarious calibration of satellite and airborne remote sensing instruments.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Georgi Georgiev and James J. Butler "The effect of weave orientation on the BRDF of tarp samples", Proc. SPIE 5189, Surface Scattering and Diffraction III, (16 October 2003); https://doi.org/10.1117/12.505865
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Bidirectional reflectance transmission function

Sensors

Reflectivity

Calibration

Error analysis

Receivers

Light sources

Back to Top