Effects of the method of preparation of organic thin films and chemical doping on charge injection from electrodes

Mari Ishihara; Kenji Okumoto; Yasuhiko Shirota

doi:10.1117/12.507976

16 February 2004 Effects of the method of preparation of organic thin films and chemical doping on charge injection from electrodes

Mari Ishihara, Kenji Okumoto, Yasuhiko Shirota

Author Affiliations +

Proceedings Volume 5214, Organic Light-Emitting Materials and Devices VII; (2004) https://doi.org/10.1117/12.507976
Event: Optical Science and Technology, SPIE's 48th Annual Meeting, 2003, San Diego, California, United States

Abstract

Effects of the method of preparation of organic thin films and chemical doping on charge injection from electrodes were investigated. It was found that charge injection from electrodes and the performance of organic electroluminescent (EL) devices are affected by the method of preparation of organic thin films, depending on the kind of materials. Organic EL devices using spin-coated films of N,N'-bis(3-methylphenyl)-N,N'-diphenyl-[1,1'-biphenyl]-4,4'-diamine (TPD) or N,N'-di(p-biphenyl-4-yl)-N,N'-diphenyl-[1,1'-biphenyl]-4,4'-diamine (p-BPD) as a hole-transport layer and tris(8-quinolinolato)aluminum (Alq₃) as an emitting layer exhibited higher injected current density and luminance than the corresponding devices using vacuum-deposited films of TPD or p-BPD. On the other hand, almost no difference was observed in the current density -- applied voltage and luminance -- applied voltage characteristics between Alq₃-based triple-layer organic EL devices fabricated with the vacuum-deposited and spin-coated films of 4,4',4"-tris[3-methylphenyl(phenyl)amino]triphenylamine (m-MTDATA) or 4,4',4"-tris(2-naphthylphenylamino)triphenylamine (2-TNATA) as a hole-injection layer together with the vacuum-deposited thin film of TPD as a hole-transport layer. An organic EL device using iodine-doped m-MTDATA as a hole-injection layer, TPD as a hole-transport layer, and Alq₃ as an emitting layer operated at a lower drive voltage and exhibited higher external quantum efficiency relative to the corresponding device using undoped m-MTDATA. It is indicated that the use of iodine-doped m-MTDATA enhances not only hole injection from the ITO electrode but also electron injection from the cathode into Alq₃.

Citation Download Citation

Mari Ishihara, Kenji Okumoto, and Yasuhiko Shirota "Effects of the method of preparation of organic thin films and chemical doping on charge injection from electrodes", Proc. SPIE 5214, Organic Light-Emitting Materials and Devices VII, (16 February 2004); https://doi.org/10.1117/12.507976

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available