Calibration procedures and measurements for the COMPASS hyperspectral imager

Jerome Zadnik; Daniel Guerin; Robert Moss; Alan Orbeta; Roberta Dixon; Christopher G. Simi; Susannah Dunbar; Anthony Hill

doi:10.1117/12.546758

12 August 2004 Calibration procedures and measurements for the COMPASS hyperspectral imager

Jerome Zadnik, Daniel Guerin, Robert Moss, Alan Orbeta, Roberta Dixon, Christopher G. Simi, Susannah Dunbar, Anthony Hill

Author Affiliations +

Proceedings Volume 5425, Algorithms and Technologies for Multispectral, Hyperspectral, and Ultraspectral Imagery X; (2004) https://doi.org/10.1117/12.546758
Event: Defense and Security, 2004, Orlando, Florida, United States

Abstract

The COMPact Airborne Spectral Sensor (COMPASS) hyperspectral imager (HSI) developed at the Army Night Vision and Electronic Sensors Directorate (NVESD) operates in the solar reflective region. The fundamental advance of the COMPASS instrument is the ability to capture 400nm to 2350nm on a single focal plane, eliminating boresighting and co-registration issues characteristic of dual FPA instruments for visible and SWIR regions. This paper presents a calibration procedure for COMPASS including spectral band profiles and radiometric calibration. These procedures expand on successful calibration procedures used for the Night Vision Infrared Spectrometer (NVIS) system. A high-resolution monochromator was used to map the band center and bandwidth profiles across the FPA with an accuracy goal of ±0.5nm using several different illumination configurations. Although optical distortions are below previous measurement capabilities, accurate band profiles provide additional data to map potential distortions within the system. Radiometric calibration was performed with a NIST-traceable flood source. Test results are presented showing a well-behaved system with an average spectral bandwidth of 8.0nm ±0.5nm over the instrument spectral range.

Citation Download Citation

Jerome Zadnik, Daniel Guerin, Robert Moss, Alan Orbeta, Roberta Dixon, Christopher G. Simi, Susannah Dunbar, and Anthony Hill "Calibration procedures and measurements for the COMPASS hyperspectral imager", Proc. SPIE 5425, Algorithms and Technologies for Multispectral, Hyperspectral, and Ultraspectral Imagery X, (12 August 2004); https://doi.org/10.1117/12.546758

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available