Paper
30 September 2004 Characterizing the nonlinear dynamic behavior of membrane optics
Author Affiliations +
Abstract
The use of true-membrane reflectors holds the promise of increasing the size of space-based apertures by decreasing payload mass and reducing launch volumes, but figure acquisition and maintenance of the thin, deployed structure present significant control challenges. The ability to manage both the static and dynamic aberrations defines the utility of these compliant mirrors for resolving quality images. The scope of the current study consists of characterizing the non-linear dynamic behavior of membrane reflectors to visible-optics quality under realistic support and loading scenarios. The basis for quality in the finite element model (FEM) deformed shape predictions is established both by comparing FEM and analytical solutions for linear static problems and by studying the convergence of eigen solutions. Most of the results are shown, too, to be within a previously determined range of optically-accurate solutions. The topographical difference between linear and non-linear dynamic solutions is characterized and correlated to support and loading regimes for eventual inclusion in closed-loop-control schemes. The objective of this paper is thus to study the non-linear characteristics of the dynamic behavior of membrane optics as the basis for future work in system identification and figure control.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eric L. Pollard, Brett J. deBlonk, R. Scott Erwin, and Christopher H.M. Jenkins "Characterizing the nonlinear dynamic behavior of membrane optics", Proc. SPIE 5528, Space Systems Engineering and Optical Alignment Mechanisms, (30 September 2004); https://doi.org/10.1117/12.557614
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Tolerancing

Chemical elements

Protactinium

Finite element methods

Reflectors

Systems modeling

Mirrors

RELATED CONTENT

A novel adhesive bonding process in reflecting mirror
Proceedings of SPIE (April 04 2023)
Parametric study of spinning polygon mirror deformations
Proceedings of SPIE (October 01 1990)
Support Systems For Testing Thin Meniscus Optical Mirrors
Proceedings of SPIE (January 05 1984)
Ray tracing from finite element results
Proceedings of SPIE (September 16 1993)

Back to Top