Paper
3 November 2004 Extremely soft x-ray generator and its applications
Eiichi Sato, Fumiko Obata, Kiyomi Takahashi, Shigehiro Sato, Etsuro Tanaka, Hidezo Mori, Toshiaki Kawai, Toshio Ichimaru, Kazuyoshi Takayama, Hideaki Ido
Author Affiliations +
Abstract
The development of an extremely soft x-ray generator with a tungsten-target tube and its applications to radiography and disinfection are described. This generator consists of a high-voltage power supply, a filament power supply, and an x-ray tube. Negative high voltages are applied to the cathode electrode in the x-ray tube, and the tube voltage and current are regulated by the input of a transformer and the filament voltage, respectively. The x-ray tube is a glass-enclosed double-focus diode with a tungsten target and a 0.2 mm-thick beryllium window. The maximum tube voltage and electric power were 60 kV and 400 W, respectively. The focal-spot sizes were 4×4 (large) and 1×1 mm (small), respectively. Extremely soft radiography was performed with a computed radiography system, and we observed fine blood vessels of about 100 μm with high contrasts. Using this generator, we performed the disinfection achieved with extremely soft x rays.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eiichi Sato, Fumiko Obata, Kiyomi Takahashi, Shigehiro Sato, Etsuro Tanaka, Hidezo Mori, Toshiaki Kawai, Toshio Ichimaru, Kazuyoshi Takayama, and Hideaki Ido "Extremely soft x-ray generator and its applications", Proc. SPIE 5537, X-Ray Sources and Optics, (3 November 2004); https://doi.org/10.1117/12.560551
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-rays

Radiography

Beryllium

Power supplies

Tungsten

Medical research

Angiography

Back to Top