Paper
30 August 2005 Improving the mode selection of bi-prism-like reflectors with intracavity amplitude masks
Yurij Parkhomenko, Boris Spektor, Joseph Shamir
Author Affiliations +
Abstract
In a recent work it was demonstrated that efficient laser mode selection can be accomplished by replacing one of the laser mirrors by a bi-prism-like (flat-roof) reflector. In that work the objective was to generate a pure "dark beam" (a laser beam with a dark central region) for high resolution metrological applications. With the same objective in mind, in this work we present a new approach that leads to significant improvement of laser performance. This approach is based on an earlier work where a narrow amplitude mask over the middle of a conventional laser mirror was used to suppress the zero-order mode to facilitate oscillation of the first-order mode possessing the required characteristics. Starting from a similar configuration, in the present work we show that the performance can be optimized by combining a partially transmitting amplitude mask with a bi-prism-like reflector. Numerical simulations predict mode selectivity enhancement of at least a factor of 3 as compared to laser resonators with bi-prism-like reflectors alone.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yurij Parkhomenko, Boris Spektor, and Joseph Shamir "Improving the mode selection of bi-prism-like reflectors with intracavity amplitude masks", Proc. SPIE 5876, Laser Beam Shaping VI, 58760Q (30 August 2005); https://doi.org/10.1117/12.619269
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transmission electron microscopy

Mirrors

Reflectors

Resonators

Laser resonators

Metrology

Modulation

RELATED CONTENT

Bi-prism-like optical elements for intracavity mode selection
Proceedings of SPIE (September 29 2004)
Shaping of dark beams in resonators with a bi lens...
Proceedings of SPIE (February 17 2010)
Beam shaping in resonators with conical reflectors
Proceedings of SPIE (February 19 2009)

Back to Top