Coloured marking inside glass by laser radiation

Grace Ligbado; Alexander Horn; Ernst Wolfgang Kreutz; Manfred M. Krauss; Norbert Siedow; Hartmut Hensel

doi:10.1117/12.631724

3 November 2005 Coloured marking inside glass by laser radiation

Grace Ligbado, Alexander Horn, Ernst Wolfgang Kreutz, Manfred M. Krauss, Norbert Siedow, Hartmut Hensel

Proceedings Volume 5989, Technologies for Optical Countermeasures II; Femtosecond Phenomena II; and Passive Millimetre-Wave and Terahertz Imaging II; 59890K (2005) https://doi.org/10.1117/12.631724
Event: European Symposium on Optics and Photonics for Defence and Security, 2005, Bruges, Belgium

Abstract

Laser labelling inside glass induces micro-cracks by high energy densities in the focus. The micro-cracks reduce the mechanical stability of glass. Light scattering allows the observer to perceive the cracks as white pixels. Coloured marking of glass in this manner is not possible. Coloured marking inside glass by changing the oxidation state of the metal ions locally in the focus does not weaken the mechanical properties of the glass. Two kind of glass systems, lime-natron-silicate and borosilicate with 0.5 % mass-content of doping are investigated. The simultaneous presence of donators and acceptors allows a transition of electrons between polyvalent ions, and can lead to permanent colour-centres inside the glass, due to the fact that the absorption of the polyvalent ions is changed by the laser-induced conversion process. For this purpose a 3 ω Nd:YAG (wavelength λ_L = 355 nm, pulse duration t = 10 to 80 ns) and a Ti:Sapphire solid-state laser (wavelength λ_L = 810 nm, pulse duration t = 200 fs) are used. The radiation parameters and the chemical composition of the glass (mainly doping) are the dominant factors to generate coloured marking. The transmittance as a function of the fluence and the change of the absorption coefficient is measured and gives a statement of the colourshade. Further the difference between lime-natron-silicate and borosilicate glass (same doping variety) is examined. Actually mauve, yellow, red-brown an grey colouring can be produced. Cracks in the microstructure of glass can also be the cause for brown colour-centres generating.

Citation Download Citation

Grace Ligbado, Alexander Horn, Ernst Wolfgang Kreutz, Manfred M. Krauss, Norbert Siedow, and Hartmut Hensel "Coloured marking inside glass by laser radiation", Proc. SPIE 5989, Technologies for Optical Countermeasures II; Femtosecond Phenomena II; and Passive Millimetre-Wave and Terahertz Imaging II, 59890K (3 November 2005); https://doi.org/10.1117/12.631724

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available