Paper
19 January 2006 A new fabrication process of silicon nanotips: NERCOM
Francis E. H. Tay, Ciprian Iliescu, Guolin Xu, Bangtao Chen, Marioara Avram
Author Affiliations +
Proceedings Volume 6036, BioMEMS and Nanotechnology II; 603608 (2006) https://doi.org/10.1117/12.638516
Event: Microelectronics, MEMS, and Nanotechnology, 2005, Brisbane, Australia
Abstract
This paper presents a new fabrication process for nanotips array using notching effect of reflected charges on mask (NERCOM). The NERCOM fabrication process is based on two phenomena: flowing of thick photoresist mask after bake and the notching effect of the reflected charges from the photoresist mask in a plasma etching process. Heating the photoresist at different temperature and time will generate different profile of the masking layer walls. During the plasma etching process, the charges (ions and radicals) are reflected by the oblique profile of the masking layer walls and generate an undercut. This phenomenon is utilized with an isotropic etching process in a Deep RIE system to produce tips. Due to the isotropy of the process, the tips are generated. The results indicate that the radii of the tips are in the range of 40 to 60 nm.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Francis E. H. Tay, Ciprian Iliescu, Guolin Xu, Bangtao Chen, and Marioara Avram "A new fabrication process of silicon nanotips: NERCOM", Proc. SPIE 6036, BioMEMS and Nanotechnology II, 603608 (19 January 2006); https://doi.org/10.1117/12.638516
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photoresist materials

Photomasks

Reactive ion etching

Silicon

Oxidation

Nanolithography

Plasma etching

RELATED CONTENT


Back to Top