Photolithographically patternable of electroluminescent liquid crystalline materials for full-colour organic light emitting displays

Andrew J. McGlashon; Katherine S. Whitehead; Donal D. C. Bradley; Martin Heeney; Iain McCulloch; Weimin Zhang; Alasdair J. Campbell

doi:10.1117/12.646426

23 February 2006 Photolithographically patternable electroluminescent liquid crystalline materials for full-colour organic light emitting displays

Andrew J. McGlashon, Katherine S. Whitehead, Donal D. C. Bradley, Martin Heeney, Iain McCulloch, Weimin Zhang, Alasdair J. Campbell

Author Affiliations +

Proceedings Volume 6117, Organic Photonic Materials and Devices VIII; 61170S (2006) https://doi.org/10.1117/12.646426
Event: Integrated Optoelectronic Devices 2006, 2006, San Jose, California, United States

Abstract

Displays based on polymer light emitting diodes are attractive due to their emissive nature, their wide viewing angles and the ability of electroluminescent conjugated polymers to be solution processable at room temperature and pressure. It is difficult, however, to deposit separate red, green and blue (RGB) pixels and to maximize performance by making the devices multi-layered. Here we present recent results on a semiconducting conjugated reactive-mesogen OLED material which is solution processable, can be potentially cured and patterned by photolithography and used in multi-layer devices. This material consists of a conjugated pentathiophene core with reactive endgroups. Spectroscopy, calorimetry and microscopy show that it forms crystalline, aggregate, liquid-crystalline and isotropic phases at a range of different temperatures. The material is deposited by spincoating from solution. Low density doping with a cationic photointiator and exposure to a specific UV wavelength to avoid damage to the conjugated core leads to cross-linking into an insoluble network. Current-voltage-luminousity and spectral measurements in standard OLED device structures show the effect of cross-linking on the transport and injection properties of the material. Quenching of fluorescence and electroluminescence is discussed. Insertion of lower-energy gap, fluorescent small molecules can potentially be used to tune the emission to any desired colour but material limitations to this technique due to dopant removal during the washing procedure were observed.

Citation Download Citation

Andrew J. McGlashon, Katherine S. Whitehead, Donal D. C. Bradley, Martin Heeney, Iain McCulloch, Weimin Zhang, and Alasdair J. Campbell "Photolithographically patternable electroluminescent liquid crystalline materials for full-colour organic light emitting displays", Proc. SPIE 6117, Organic Photonic Materials and Devices VIII, 61170S (23 February 2006); https://doi.org/10.1117/12.646426

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available