Phase calibration for attenuating phase-shift masks

Michael S. Hibbs; Timothy A. Brunner

doi:10.1117/12.655729

24 March 2006 Phase calibration for attenuating phase-shift masks

Proceedings Volume 6152, Metrology, Inspection, and Process Control for Microlithography XX; 61521L (2006) https://doi.org/10.1117/12.655729
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

As metrology tolerances for photomasks become increasingly tight, the issues of measurement methods and calibration standards become more and more important. This is as true for optical phase metrology as it is for dimensional metrology. To first order, an optical phase standard can be defined by etching a step or trench into a transparent medium like fused silica with a well-characterized index of refraction. The normal-incidence phase shift of such a structure can be calculated with accuracy limited mainly by our ability to measure the physical depth of the trench. Other methods exist for measuring optical phase shifts in alternating aperture masks. For example a Levenson grating exhibits symmetrical behavior through focus only if the phase difference between the phase shifted and unshifted openings is exactly 180°. A measured asymmetry between the phase shifted and unshifted clear features in such a grating can be used to quantitatively measure the deviation from 180° optical phase. This approach is particularly attractive because the measurement can be made on an aerial image metrology system with the numerical aperture and illumination conditions used by the wafer stepper that will eventually project the mask. Calibration of optical phase in attenuating phase masks is more difficult. Until now there has been no accurate way to create and verify a calibration artifact. In this paper we discuss a new phase metrology pattern for attenuating phase masks. The phase error of this pattern can be determined to high accuracy by aerial image measurements. This pattern can be used to create an optical phase standard for calibrating phase metrology equipment for attenuated phase masks, or as a witness pattern on a product mask to verify the phase accuracy of that mask.

Citation Download Citation

Michael S. Hibbs and Timothy A. Brunner "Phase calibration for attenuating phase-shift masks", Proc. SPIE 6152, Metrology, Inspection, and Process Control for Microlithography XX, 61521L (24 March 2006); https://doi.org/10.1117/12.655729

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available