Progress on GaAs cryogenic readout circuits for SISCAM

H. Nagata; J. Kobayashi; H. Matsuo; M. Fujiwara

doi:10.1117/12.670966

27 June 2006 Progress on GaAs cryogenic readout circuits for SISCAM

H. Nagata, J. Kobayashi, H. Matsuo, M. Fujiwara

Proceedings Volume 6275, Millimeter and Submillimeter Detectors and Instrumentation for Astronomy III; 627527 (2006) https://doi.org/10.1117/12.670966
Event: SPIE Astronomical Telescopes + Instrumentation, 2006, Orlando, Florida , United States

Abstract

We are developing cryogenic readout circuits for the array of superconducting tunneling junctions (STJs) at submillimeter wavelength SISCAM (Superconductive Imaging Submillimeter-wave CAMera). A current conceptual design of SISCAM will employ a direct hybrid array system just like CMOS image sensors widely used at optical and infrared wavelength. Because of relatively large impedance of the STJ fabricated by RIKEN (~10 MΩ in a dark condition), it requires readout preamplifier with low current noise. Therefore, it is not suitable for the STJ to use a readout system by Superconductive Quantum Interferences Devices as for Transition Edge Sensor. Instead, we selected capacitive transimpedance amplifier (CTIA) using a SONY n-type GaAs Junction Field Effect Transistor (JFET). However, the CTIA has not been used as the readout of the STJ. Therefore, we measured the photocurrent of the STJ by the CTIA with Silicon JFETs and by transimpedance amplifier (TIA), which is a conventional readout for the STJ, in the same bias condition, and confirmed both results are in good agreement. Additionally, we report development of readout integrated circuits with GaAs JFETs. In order to design the CTIA circuit with the GaAs JFETs, we fabricated the independent GaAs JFETs and matched pairs of them. We measured electrical characteristics of these GaAs JFETs at the cryogenic temperatures less than 4.2 K. We demonstrated performance of an operational amplifier fabricated with the GaAs JFETs measuring a differential amplifier with the dual GaAs JFET, and additionally estimate amplifier gain, offset voltage, and power consumption of the CTIA by the circuit simulation using the PSPICE. In consequence, the expected performance fulfills the requirements for the readout amplifier of the STJs except for the noise performance.

Citation Download Citation

H. Nagata, J. Kobayashi, H. Matsuo, and M. Fujiwara "Progress on GaAs cryogenic readout circuits for SISCAM", Proc. SPIE 6275, Millimeter and Submillimeter Detectors and Instrumentation for Astronomy III, 627527 (27 June 2006); https://doi.org/10.1117/12.670966

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available