Paper
4 October 2006 Chirped fiber gratings fabricated on curved fibers using uniform phase mask
Author Affiliations +
Proceedings Volume 6351, Passive Components and Fiber-based Devices III; 63513Q (2006) https://doi.org/10.1117/12.688592
Event: Asia-Pacific Optical Communications, 2006, Gwangju, South Korea
Abstract
We fabricated linearly chirped fiber gratings by using uniform phase mask instead of chirped mask. The chirp of the grating is realized by precisely setting the distance between the fiber and the phase mask at every point of the fiber. In experiments we derived linearly chirped fiber grating which has dispersion -1102ps/nm, time delay ripple is 17ps. And also the asymmetry high order apodization method is used successfully to reduce the time delay ripple. The experiment results consistent with the simulation results. We can fabricate gratings with different chirp extent use one uniform phase mask conveniently by only changing the curve function of the fiber.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bin Li, Yan Liu, Zhongwei Tan, Ou Xu, Shaohua Lu, and Shuisheng Jian "Chirped fiber gratings fabricated on curved fibers using uniform phase mask", Proc. SPIE 6351, Passive Components and Fiber-based Devices III, 63513Q (4 October 2006); https://doi.org/10.1117/12.688592
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Refractive index

Ultraviolet radiation

Modulation

Light sources

Phase shift keying

Apodization

Near field

Back to Top