Paper
4 May 2007 Through-the-wall sensor systems based on hard x-ray imaging optics
Author Affiliations +
Abstract
This paper discusses a new approach to X-ray non-intrusive (NDE) inspection based on hard X-ray imaging optics. A new X-ray lens, called lobster-eye-lens (LEL) is the transmission lens, based on reflection optics, with grazing-angle deflection of 0.2° and photon energy of 40-100 keV. The lens reflection-optics is based on large, high-quality X-ray mirrors with r.m.s. lower than 1 nm. The through-the-wall inspection capability of such a system, based on Compton back-scattering, can be applied for longer ranges, (up to 100 m in the air), and thick walls (over 2 cm for wood, and over 2 mm for metal). CONOPS examples are given for homeland security applications.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tomasz Jannson, Michael Gertsenshteyn, Victor Grubsky, Pauline Amouzou, and Richard Koziol "Through-the-wall sensor systems based on hard x-ray imaging optics", Proc. SPIE 6538, Sensors, and Command, Control, Communications, and Intelligence (C3I) Technologies for Homeland Security and Homeland Defense VI, 65380A (4 May 2007); https://doi.org/10.1117/12.718765
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-rays

Hard x-rays

X-ray optics

Compton scattering

Signal attenuation

Imaging systems

Mirrors

RELATED CONTENT

The HEXITEC hard x ray pixelated CdTe imager for fast...
Proceedings of SPIE (August 05 2016)
MAXIM: the black hole imager
Proceedings of SPIE (October 11 2004)
Effect of energy on x-ray penetration and image quality
Proceedings of SPIE (December 28 1998)
A hard x ray telescope science enhancement package for the...
Proceedings of SPIE (September 20 2007)
X ray beam metrology and X ray optic alignment by...
Proceedings of SPIE (September 16 2005)

Back to Top