Paper
11 September 2007 Performance analysis of CuIn1-xGaxS2 (CIGS2)thin film solar cells based on semiconductor properties
Neelkanth G. Dhere, Anant H. Jahagirdar, Shantinath R. Ghongadi
Author Affiliations +
Abstract
CuIn1-xGaxS2 (CIGS2) has a bandgap of ~1.5 eV making it an ideal candidate for space applications. CIGS2 thin films were prepared by sulfurizing CuGa/In precursor on Mo-coated glass/ stainless steel (SS) substrates in N2:H2S (4% or 8%) mixture at 475°C. PV parameters measured under AM1.5 conditions at NREL were as follows: the first cell on stainless steel substrate, Voc = 763.3 mV, Jsc = 20.26 mA/cm2, FF = 67.04% and η = 10.4% and for the second cell on Mo-coated glass substrate, Voc = 830.5 mV, Jsc = 20.88 mA/cm2, FF = 69.13% and η = 11.99%. A detailed comparative study of PV parameter of the two cells showed that the increase in the efficiency from 10.4% to 11.99% was made possible by an increase of shunt resistance Rp in the dark from 1160 Ω-cm2 to 2500 Ω-cm2; a slight reduction of series resistance Rs; and a reduction of the diode factor, A and reverse saturation current density, Jo respectively from ~2.1 and ~2.6x10-8 A cm-2 to ~1.72 and ~1.41x10-10 A cm-2.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Neelkanth G. Dhere, Anant H. Jahagirdar, and Shantinath R. Ghongadi "Performance analysis of CuIn1-xGaxS2 (CIGS2)thin film solar cells based on semiconductor properties", Proc. SPIE 6651, Photovoltaic Cell and Module Technologies, 665104 (11 September 2007); https://doi.org/10.1117/12.734605
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Solar cells

Thin films

Gallium

Diodes

Resistance

Thin film solar cells

Molybdenum

Back to Top