Paper
30 October 2007 Fast and accurate laser bandwidth modeling of optical proximity effects
Ivan Lalovic, Oleg Kritsun, Joeseph Bendik, Mark Smith, Chris Sallee, Nigel Farrar
Author Affiliations +
Abstract
In this work, we model the effects of excimer laser bandwidth on optical proximity effects in high-NA ArF dry and immersion lithography. We quantify the errors introduced by using common approximation methods for the laser spectrum, such as the modified Lorentzian and Gaussian forms. Although these approximations are simple to use, and their symmetry properties can lead to reduced simulation run-times, they typically induce significant CD error when compared to the use of measured spectral profiles, which are obtained from high-resolution spectrophotometry. In this paper we establish some accuracy benchmarks and demonstrate the need for inclusion of information about the spectral profile - for the laser type of interest - in order to achieve sub-nanometer image calculation accuracy required for optical proximity correction. We further assess the speed-accuracy tradeoffs in terms of data truncation and sampling, and propose some practical limits for sampling the illumination spectrum. Additionally, in this work, we propose a new physically-based spectrum approximation method, which significantly reduces computation time at a cost of less than 0.25nm residual image-CD error from the fully-sampled image calculation. In addition to aerial image, we compare 45nm-node calibrated resist models and latent image results for 0.92NA dry and 1.2NA immersion processes using measured illumination profiles and lens aberrations. Finally, we consider the laser bandwidth sensitivity of 2D line-end patterns and typical post-OPC designs for a logic gate-process.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ivan Lalovic, Oleg Kritsun, Joeseph Bendik, Mark Smith, Chris Sallee, and Nigel Farrar "Fast and accurate laser bandwidth modeling of optical proximity effects", Proc. SPIE 6730, Photomask Technology 2007, 67301X (30 October 2007); https://doi.org/10.1117/12.746594
Lens.org Logo
CITATIONS
Cited by 10 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lithography

Optical simulations

Critical dimension metrology

Optical proximity correction

Laser stabilization

Control systems

Excimer lasers

Back to Top