Experimental research on dimensional measurement of hot parts based on CCD

Juan Wang; Zuron Qiu; Jin Li

doi:10.1117/12.755178

29 January 2008 Experimental research on dimensional measurement of hot parts based on CCD

Juan Wang, Zuron Qiu, Jin Li

Author Affiliations +

Proceedings Volume 6829, Advanced Materials and Devices for Sensing and Imaging III; 68291D (2008) https://doi.org/10.1117/12.755178
Event: Photonics Asia 2007, 2007, Beijing, China

Abstract

Dimensional measurement of hot parts, such as forgings, is desirable to permit real-time process measure and control, but typically it is not convenient as a result of the difficulty in working with very hot workpieces. On the contrary, the disadvantage of high temperature of the hot parts can properly be used to measure the dimensions based on CCD (Charged Coupled Device) sensors. It is well known that the hot parts can transmit lights, so the general CCD can be applied to measure the dimensions of the hot part (e.g. length and diameter etc.) rapidly and non-contact without any illuminator. Since the illumination system can be omitted, the measurement system can be more flexible and convenient. In this paper the principle of the measurement based on CCD is briefly described at first. Then the structure of measurement system is presented in detail. At last, some experiments are performed to measure the diameter of hot parts. The experimental results indicate that the measured diameter is correlated with the luminance of hot parts and the luminance has something to do with the temperature of the hot parts, and the methods to avoid this question are discussed. In addition, the error sources in the measurement system are also discussed. From these experiments, the method to measure the dimension of hot parts based on inexpensive CCD sensor is feasible.

Citation Download Citation

Juan Wang, Zuron Qiu, and Jin Li "Experimental research on dimensional measurement of hot parts based on CCD", Proc. SPIE 6829, Advanced Materials and Devices for Sensing and Imaging III, 68291D (29 January 2008); https://doi.org/10.1117/12.755178

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE