Paper
16 May 2008 Cladding mode resonance of special optical fiber for bending sensor with temperature insensitivity
Tingyun Wang, Fufei Pang, Xianglong Zeng, Wenbin Liang, Wenchao Xiang, Zhenyi Chen
Author Affiliations +
Proceedings Volume 7004, 19th International Conference on Optical Fibre Sensors; 70042M (2008) https://doi.org/10.1117/12.785991
Event: 19th International Conference on Optical Fibre Sensors, 2008, Perth, WA, Australia
Abstract
In this paper, we fabricated and demonstrated a temperature-insensitive fiber bending sensor based on a special optical fiber with cladding mode resonance. The special fiber, with pure silica core and a fluorine-codoped inner cladding, fabricated by using conventional MCVD technique exhibited strong cladding mode resonance. The bend curvature dependence of resonant spectrum was investigated with high sensitivity to be -10.15nm•m-1 and was found to possess an insensitivity to temperature. The proposed special fiber bending sensor is simple and low cost.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tingyun Wang, Fufei Pang, Xianglong Zeng, Wenbin Liang, Wenchao Xiang, and Zhenyi Chen "Cladding mode resonance of special optical fiber for bending sensor with temperature insensitivity", Proc. SPIE 7004, 19th International Conference on Optical Fibre Sensors, 70042M (16 May 2008); https://doi.org/10.1117/12.785991
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Sensors

Optical fibers

Fiber optics sensors

Silica

Single mode fibers

Fluorine

Back to Top