Paper
27 September 2008 A simple integrated ratiometric wavelength monitor based on multimode interference structure
Author Affiliations +
Abstract
Wavelength measurement or monitoring can be implemented using a ratiometric power measurement technique. A ratiometric wavelength monitor normally consists of a Y-branch splitter with two arms: an edge filter arm with a well defined spectral response and a reference arm or alternatively, two edge filters arms with opposite slope spectral responses. In this paper, a simple configuration for an integrated ratiometric wavelength monitor based on a single multimode interference structure is proposed. By optimizing the length of the MMI and the two output port positions, opposite spectral responses for the two output ports can be achieved. The designed structure demonstrates a spectral response suitable for wavelength measurement with potentially a 10 pm resolution over a 100 nm wavelength range.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Agus Muhamad Hatta, Gerald Farrell, and Qian Wang "A simple integrated ratiometric wavelength monitor based on multimode interference structure", Proc. SPIE 7100, Optical Design and Engineering III, 710023 (27 September 2008); https://doi.org/10.1117/12.797670
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Brain-machine interfaces

Optical filters

Beam propagation method

Waveguides

Photodetectors

Signal to noise ratio

Structural design

Back to Top