Paper
11 November 2008 Simultaneous measurement of surrounding temperature and refractive index by the tilted fiber Bragg grating
Author Affiliations +
Proceedings Volume 7134, Passive Components and Fiber-based Devices V; 71343W (2008) https://doi.org/10.1117/12.802884
Event: Asia-Pacific Optical Communications, 2008, Hangzhou, China
Abstract
Simultaneous independent measurement of surrounding refractive index (SRI) and temperature using the tilted fiber Bragg grating is proposed and experimentally demonstrated. Core mode is sensitive only to the temperature while cladding modes are sensitive to the temperature and SRI, theirs temperature sensitivities are equal. The wavelength shifts of two kinds of modes with a change of temperature and SRI allow for simultaneous discrimination temperature and SRI effect. In addition, the sensitivity of TFBG to SRI is significantly enhanced by hydrofluoric etching clad; it can satisfy the custom-built sensitivity that the clad of TFBG was etched in different degrees as well. This sensor is potential for chemical-biochemical sensing application and measuring the concentration of the chemical solutions accurately.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yinping Miao, Bo Liu, Shuang Tian, and Qida Zhao "Simultaneous measurement of surrounding temperature and refractive index by the tilted fiber Bragg grating", Proc. SPIE 7134, Passive Components and Fiber-based Devices V, 71343W (11 November 2008); https://doi.org/10.1117/12.802884
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Refractive index

Temperature metrology

Sensors

Etching

Fiber Bragg gratings

Matrices

Back to Top