Paper
19 February 2009 600-W single-mode single-frequency thulium fiber laser amplifier
Author Affiliations +
Abstract
A four-stage, Tm-doped fiber amplifier chain emitted 608 W of single-frequency (SF) output power with 53 dB gain, 54% slope efficiency, and M2 = 1.05 beam quality. The output power was limited by available pump power. The final amplifier stage preserved the input <5-MHz linewidth and imposed negligible phase noise above 3 kHz. SBS limits at the 2040-nm operating wavelength were measured by splicing different lengths of passive fiber to the amplifier exit. Thermal limits of the fiber were explored analytically and are consistent with the measured power performance. Comparison of the SBS and thermal limits suggests a maximum SF power of ~750 W from this fiber configuration, with further potential to scale past 1 kW with different fiber parameters. To our knowledge, this is the highest power reported to date from any single-frequency, single-mode fiber laser.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gregory D. Goodno, Lewis D. Book, and Joshua E. Rothenberg "600-W single-mode single-frequency thulium fiber laser amplifier", Proc. SPIE 7195, Fiber Lasers VI: Technology, Systems, and Applications, 71950Y (19 February 2009); https://doi.org/10.1117/12.809765
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Amplifiers

Fiber amplifiers

Thin film coatings

Absorption

Optical amplifiers

Coating

Back to Top