Paper
18 February 2009 Sensor-controlled laser processing of polymers and compound materials
Author Affiliations +
Abstract
This report discusses the optimisation of laser materials processing of polymers and compound materials by employment of smart sensors which measure laser parameters as well as processing progress online and deliver signals which are used for instantaneous laser and motion control. The mutual interdependence between suitable laser parameters and given mechanical, thermal and optical material properties is considered. Some examples of laser cutting, laser milling of channels and holes with precisely defined depth as well as laser of welding are treated. Process simulation plays an important part in finding the right adjustment of laser parameters as function of sample properties and processing aim. Often laser parameters and sample changes have to be measured and controlled very fast between adjacent irradiations of the sample by pulse sequences (up to about 100 KHz) or between repetition cycles of scanned cw lasers. The same sensors measure and store the processing results and decide whether the sample finally fulfils all quality criteria. The value of such laser processing units strongly depends on the smartness of the applied sensors and their interplay with the laser as a tool.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bernd Wilhelmi "Sensor-controlled laser processing of polymers and compound materials", Proc. SPIE 7276, Photonics and Optoelectronics Meetings (POEM) 2008: Laser Technology and Applications, 72761K (18 February 2009); https://doi.org/10.1117/12.821594
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Laser processing

Sensors

Laser welding

Manufacturing

Metals

Absorption

RELATED CONTENT

Teradiode's high brightness semiconductor lasers
Proceedings of SPIE (April 22 2016)
Latest developments in laser manufacturing
Proceedings of SPIE (September 07 1994)
Trends In Materials Processing With Laser Radiation
Proceedings of SPIE (April 10 1989)
Laser processing of plastics
Proceedings of SPIE (March 31 1995)

Back to Top