FIB mask repair technology for EUV mask

Tsuyoshi Amano; Yasushi Nishiyama; Hiroyuki Shigemura; Tsuneo Terasawa; Osamu Suga; Kensuke Shiina; Fumio Aramaki; Anto Yasaka; Tsukasa Abe; Hiroshi Mohri

doi:10.1117/12.824335

11 May 2009 FIB mask repair technology for EUV mask

Tsuyoshi Amano, Yasushi Nishiyama, Hiroyuki Shigemura, Tsuneo Terasawa, Osamu Suga, Kensuke Shiina, Fumio Aramaki, Anto Yasaka, Tsukasa Abe, Hiroshi Mohri

Author Affiliations +

Proceedings Volume 7379, Photomask and Next-Generation Lithography Mask Technology XVI; 73792L (2009) https://doi.org/10.1117/12.824335
Event: Photomask and NGL Mask Technology XVI, 2009, Yokohama, Japan

Abstract

We evaluated a FIB-CVD (Focused Ion Beam-Chemical Vapor Deposition) process for repairing clear defects on EUV masks. For the CVD film, we selected Carbon material. Our simulation result showed that the properties of wafer-prints depended on the density of the carbon films deposited for repairing the clear defects. Especially, when the density of carbon film was higher than that of graphite the properties of the wafer-prints came out to be almost same as obtained from Ta-based absorbers. For CVD, in this work we employed typical carbon based precursor that has been routinely used for repairing photomask patterns. The defects created for our evaluation were line-cut defects in a hp225nm L/S pattern. The performance of defect repair was evaluated by SFET (Small Field Exposure Tool) printability test. The study showed that the focus characteristic of repaired region deteriorated as the thickness of the deposition film decreased, especially when the thickness went below the thickness of the absorber. However, when the deposition film thickness was same as that of the absorber film, focus characteristic was found to be excellent. The study also revealed that wafer-print CDs could be controlled by controlling the CDs of the deposition films. The durability of deposition films against the buffer layer etching process and hydrogen radical cleaning process is also discussed.

Citation Download Citation

Tsuyoshi Amano, Yasushi Nishiyama, Hiroyuki Shigemura, Tsuneo Terasawa, Osamu Suga, Kensuke Shiina, Fumio Aramaki, Anto Yasaka, Tsukasa Abe, and Hiroshi Mohri "FIB mask repair technology for EUV mask", Proc. SPIE 7379, Photomask and Next-Generation Lithography Mask Technology XVI, 73792L (11 May 2009); https://doi.org/10.1117/12.824335

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available