Paper
8 April 2010 Optical encoder feedback system for levitating rotor system
Shrey Khanna, Joe N. Ho, Jonathan Irwen, Gurjinder Rakka, Weichih Wang
Author Affiliations +
Abstract
This paper describes the design and fabrication of feedback control system for a three phase motor with a diamagnetically levitating rotor. The planar rotor described in this paper uses a triangular configuration of magnets that rotates due to nine electric coils evenly spaced around the rotor. An optical mechanical feedback system controls the frequency at which the rotor spins. The current input to the coil is controlled by a mechanical relay circuit which latches based on a DC pulse signal generated by a PID control algorithm. The mechanical relay circuit allows current to flow to each coils (the actuators of this system), which then produces a magnetic field strong enough to spin the rotor.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shrey Khanna, Joe N. Ho, Jonathan Irwen, Gurjinder Rakka, and Weichih Wang "Optical encoder feedback system for levitating rotor system", Proc. SPIE 7650, Health Monitoring of Structural and Biological Systems 2010, 76501Z (8 April 2010); https://doi.org/10.1117/12.847713
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Control systems

Feedback control

Magnetic sensors

LabVIEW

Optical encoders

Control systems design

Back to Top