High-speed 850-nm VCSELs for 40-Gb/s transmission

Johan Gustavsson; Petter Westbergh; Krzysztof Szczerba; Åsa Haglund; Anders Larsson; Magnus Karlsson; Peter Andrekson; Friedhelm Hopfer; Gerrit Fiol; Dieter Bimberg; Bengt-Erik Olsson; A. Kristiansson; Sorcha Healy; Eoin O'Reilly; Andrew Joel

doi:10.1117/12.854516

26 April 2010 High-speed 850-nm VCSELs for 40-Gb/s transmission

Johan Gustavsson, Petter Westbergh, Krzysztof Szczerba, Åsa Haglund, Anders Larsson, Magnus Karlsson, Peter Andrekson, Friedhelm Hopfer, Gerrit Fiol, Dieter Bimberg, Bengt-Erik Olsson, A. Kristiansson, Sorcha Healy, Eoin O'Reilly, Andrew Joel

Author Affiliations +

Proceedings Volume 7720, Semiconductor Lasers and Laser Dynamics IV; 772002 (2010) https://doi.org/10.1117/12.854516
Event: SPIE Photonics Europe, 2010, Brussels, Belgium

Abstract

We have explored the possibility to extend the data transmission rate for standard 850-nm GaAs-based VCSELs beyond the 10 Gbit/s limit of today's commercially available directly-modulated devices. By sophisticated tailoring of the design for high-speed performance we demonstrate that 10 Gb/s is far from the upper limit. For example, the thermal conductivity of the bottom mirror is improved by the use of binary compounds, and the electrical parasitics are kept at a minimum by incorporating a large diameter double layered oxide aperture in the design. We also show that the intrinsic high speed performance is significantly improved by replacing the traditional GaAs QWs with strained InGaAs QWs in the active region. The best overall performance is achieved for a device with a 9 μm diameter oxide aperture, having in a threshold current of 0.6 mA, a maximum output power of 9 mW, a thermal resistance of 1.9 °C/mW, and a differential resistance of 80 Ω. The measured 3dB bandwidth exceeds 20 GHz, and we experimentally demonstrate that the device is capable of error-free transmission (BER<10^-12) under direct modulation at a record-high bit-rate of 32 Gb/s over 50 m of OM3 fiber at room temperature, and at 25 Gb/s over 100 m of OM3 fiber at 85 °C. We also demonstrate transmission at 40 Gb/s over 200 m of OM3+ fiber at room temperature using a subcarrier multiplexing scheme with a spectrally efficient 16 QAM modulation format. All transmission results were obtained with the VCSEL biased at current densities between 11-14 kA/cm², which is close to the 10 kA/cm² industry benchmark for reliability. Finally, we show that by a further reduction of the oxide capacitance and by reducing the photon lifetime using a shallow surface etch, a record bandwidth of 23 GHz for 850 nm VCSELs can be reached.

Citation Download Citation

Johan Gustavsson, Petter Westbergh, Krzysztof Szczerba, Åsa Haglund, Anders Larsson, Magnus Karlsson, Peter Andrekson, Friedhelm Hopfer, Gerrit Fiol, Dieter Bimberg, Bengt-Erik Olsson, A. Kristiansson, Sorcha Healy, Eoin O'Reilly, and Andrew Joel "High-speed 850-nm VCSELs for 40-Gb/s transmission", Proc. SPIE 7720, Semiconductor Lasers and Laser Dynamics IV, 772002 (26 April 2010); https://doi.org/10.1117/12.854516

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available