Paper
2 February 1988 Improved Electrical Measurement Techniques For The Characterization Of Microwave Field Effect Transistors
Steven E. Rosenbaum, Octavius Pitzalis, Joe M. Marzan
Author Affiliations +
Proceedings Volume 0795, Characterization of Very High Speed Semiconductor Devices and Integrated Circuits; (1988) https://doi.org/10.1117/12.940968
Event: Advances in Semiconductors and Semiconductor Structures, 1987, Bay Point, FL, United States
Abstract
Improved methods are presented for the measurement and characterization of gallium arsenide (GaAs) microwave field effect transistors (FETs). An improved test fixture is discussed that is easier to use and more accurate than previous fixtures. A technique is presented that enables calibration at the input and output of the device under test (DUT) rather than the fixture connectors. A lumped element equivalent circuit model of the FET is used to predict electrical characteristics, amplifier gain, and minimum noise figure at higher-than-measurement frequencies and to obtain an improved physical understanding of the FET operation.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Steven E. Rosenbaum, Octavius Pitzalis, and Joe M. Marzan "Improved Electrical Measurement Techniques For The Characterization Of Microwave Field Effect Transistors", Proc. SPIE 0795, Characterization of Very High Speed Semiconductor Devices and Integrated Circuits, (2 February 1988); https://doi.org/10.1117/12.940968
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Field effect transistors

Calibration

Microwave radiation

Integrated circuits

Semiconductors

Waveguides

Circuit switching

Back to Top