Paper
8 June 2011 Study of LCE nanocomposites through electron microscopy
N. Torras, J. Jobet, J. E. Marshall, K. Zinoviev, D. Yates, L. Rotkina, J. Esteve, E. M. Terentjev, E. M. Campo
Author Affiliations +
Abstract
Electron microscopy was used to study previously sintered nanocomposites featuring dispersed carbon nanotubes by liquid crystal polymer dispersion and further cross-linking into liquid crystal elastomers, which resulted in a thermo-mechanical actuator. The suitability of conventional scanning electron microscopy techniques with varying coating conditions revealed the development of local charging effects, although enough latitude was granted for imaging at high vacuum modes, with differentiating contrast of the filler in the matrix. Carbon coating did contribute to charge management, although the composite might have been thermo-mechanically activated during deposition. Further, effects from focus ion beam thinning and contrast in transmission electron microscopy are discussed.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
N. Torras, J. Jobet, J. E. Marshall, K. Zinoviev, D. Yates, L. Rotkina, J. Esteve, E. M. Terentjev, and E. M. Campo "Study of LCE nanocomposites through electron microscopy", Proc. SPIE 8036, Scanning Microscopies 2011: Advanced Microscopy Technologies for Defense, Homeland Security, Forensic, Life, Environmental, and Industrial Sciences, 80360G (8 June 2011); https://doi.org/10.1117/12.885539
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Scanning electron microscopy

Transmission electron microscopy

Polymers

Coating

Ion beams

Electron microscopy

Back to Top