Paper
24 September 2011 Effects of pitch and shape for diffraction grating in LED fog lamp
Hsi-Chao Chen, Jun-Yu Lin, Jih-Huah Wu, Shih-Hsin Ma, Chi-Hao Yang
Author Affiliations +
Abstract
The characteristics of light-emitting diodes (LEDs) that make them energy-efficient and long-lasting light source for general illumination have attracted a great attention from the lighting industry and commercial market. As everyone know LEDs have the advantages of environmental protection, long lifetime, fast response time (μs), low voltage and good mechanical properties. Their high luminance and the wide region of the dominant wavelengths within the entire visible spectrum mean that people have high anticipations for the applications of LEDs. The output lighting from reflector in the traditional fog lamp was required to fit the standard of the ECE R19 F3 regulation. Therefore, this study investigated the effects of pitch and angle for a diffraction grating in LED fog lamp. The light pattern of fog lamp must be satisfied ECE regulations, so a design of diffraction grating to shift down the lighting was required. There are three LEDs (Cree XLamp XPE LEDs) as the light source in the fog lamp for the illumination efficiency. Then, an optimal simulation of diffraction grating was done for the pitch and angle of the diffraction grating at the test distance of 25 meters. The best pitch and angle was 2mm and 60 degree for the grating shape of wedge type.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hsi-Chao Chen, Jun-Yu Lin, Jih-Huah Wu, Shih-Hsin Ma, and Chi-Hao Yang "Effects of pitch and shape for diffraction grating in LED fog lamp", Proc. SPIE 8123, Eleventh International Conference on Solid State Lighting, 81231J (24 September 2011); https://doi.org/10.1117/12.893402
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Lamps

Fiber optic gyroscopes

Diffraction gratings

Light sources and illumination

Electrochemical etching

Reflectors

RELATED CONTENT


Back to Top