Paper
3 October 2011 Optical and thin film properties of mixed oxides deposited by pulsed reactive magnetron sputtering
Stefan Bruns, Michael Vergöhl
Author Affiliations +
Abstract
Reactive magnetron sputtering was used to deposit optical thin films. In order to obtain high deposition rates, metallic targets were used. For the creation of mixed oxides bipolar pulsed sputtering was applied to two different targets. A new process control setup was developed to monitor the oxidation state of both targets individually. Two different elemental targets are co-sputtered in oxygen-argon atmosphere within the lambda-probe stabilized transition mode. The composition is controlled by optical emission spectroscopy. Thus different mixtures are accessible without changing target material. Varied mixtures in the system hafnia-silica have been prepared. The optical properties (refractive indices, absorption, surface roughness, density) as well as mechanical behavior (film stress, hardness) of the mixtures are compared to pure oxide materials. By mixing the oxides thin film quality can be improved beyond the properties of the single materials.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stefan Bruns and Michael Vergöhl "Optical and thin film properties of mixed oxides deposited by pulsed reactive magnetron sputtering", Proc. SPIE 8168, Advances in Optical Thin Films IV, 81680N (3 October 2011); https://doi.org/10.1117/12.896838
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sputter deposition

Thin films

Oxides

Silica

Plasma

Hafnium

Refractive index

Back to Top