Paper
14 February 2012 Performance evaluation of direct laser lithography system for rotationally symmetric diffractive optical elements
Author Affiliations +
Abstract
We have developed a direct laser lithography system for fabrication of precision diffractive optical elements such as Fresnel zone plates and computer-generated holograms. The developed lithography system has possible working area up to 360 mm and minimum linewidth of 0.5 μm. To assure the performance of the lithography system, the performance evaluation was carried out on the moving stages, the writing head module, and the light source, respectively. In this paper, we report the performance evaluation including the standard uncertainties of each part, the combined standard uncertainty, and finally the expanded uncertainty to give a particular level of confidence.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dong-Ik Kim, Hyug-Gyo Rhee, and Geon Hee Kim "Performance evaluation of direct laser lithography system for rotationally symmetric diffractive optical elements", Proc. SPIE 8249, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics V, 82491C (14 February 2012); https://doi.org/10.1117/12.906548
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lithography

Computer generated holography

Diffractive optical elements

Laser systems engineering

Light sources

Head

Standards development

Back to Top