Paper
18 May 2012 Infrared signature measurements with the ABB dual-band hyperspectral imager
Florent Prel, Louis Moreau, Stéphane Lantagne, Ritchie D. Bullis, Claude Roy, Christian Vallières, Luc Levesque
Author Affiliations +
Abstract
MR-i is an imaging Fourier-Transform spectro-radiometer. This field instrument generates spectral datacubes in the MWIR and LWIR. It is designed to acquire the spectral signatures of rapidly evolving events. The spectroradiometer is modular. The two output ports of the instrument can be populated with different combinations of detectors (imaging or not). For instance, to measure over a broad spectral range one output port can be equipped with a LWIR camera while the other port is equipped with a MWIR camera. No dichroic filters are used to split the bands, hence enhancing the sensitivity. Both ports can be equipped with cameras imaging the same spectral range but set at different sensitivity levels in order to increase the measurement dynamic range and avoid saturation of bright parts of the scene while simultaneously obtaining good measurements of the faintest parts of the scene. Various telescope options can be used for the input port.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Florent Prel, Louis Moreau, Stéphane Lantagne, Ritchie D. Bullis, Claude Roy, Christian Vallières, and Luc Levesque "Infrared signature measurements with the ABB dual-band hyperspectral imager", Proc. SPIE 8355, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XXIII, 83550W (18 May 2012); https://doi.org/10.1117/12.918686
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Spectral resolution

Sensors

Mid-IR

Infrared cameras

Time metrology

Signal to noise ratio

Back to Top