Paper
30 May 2013 Large-aperture active optical carbon fiber reinforced polymer mirror
Author Affiliations +
Abstract
An active reflective component can change its focal length by physically deforming its reflecting surface. Such elements exist at small apertures, but have yet to be fully realized at larger apertures. This paper presents the design and initial results of a large-aperture active mirror constructed of a composite material called carbon fiber reinforced polymer (CFRP). The active CFRP mirror uses a novel actuation method to change radius of curvature, where actuators press against two annular rings placed on the mirror’s back. This method enables the radius of curvature to increase from 2000mm to 2010mm. Closed-loop control maintains good optical performance of 1.05 waves peak-to-valley (with respect to a HeNe laser) when the active CFRP mirror is used in conjunction with a commercial deformable mirror.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matthew E. L. Jungwirth, Christopher C. Wilcox, David V. Wick, Michael S. Baker, Clinton G. Hobart, Jared J. Milinazzo, Joseph Robichaud, Robert C. Romeo, Robert N. Martin, Jerome Ballesta, Emeric Lavergne, and Eustace L. Dereniak "Large-aperture active optical carbon fiber reinforced polymer mirror", Proc. SPIE 8725, Micro- and Nanotechnology Sensors, Systems, and Applications V, 87250W (30 May 2013); https://doi.org/10.1117/12.2020722
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Monochromatic aberrations

Photovoltaics

Actuators

Active optics

Carbon

Disk lasers

Back to Top