Design of LED edge-lit light bar for automotive taillight applications

Jyh-Cheng Yu; Jia-Hao Chen; Shih-Chiang Liu

doi:10.1117/12.2024842

30 September 2013 Design of LED edge-lit light bar for automotive taillight applications

Jyh-Cheng Yu, Jia-Hao Chen, Shih-Chiang Liu

Proceedings Volume 8835, LED-based Illumination Systems; 88350G (2013) https://doi.org/10.1117/12.2024842
Event: SPIE Optical Engineering + Applications, 2013, San Diego, California, United States

Abstract

This study investigates the optical design of LED edge-lit curved light bar and applies to the design of automotive taillight. LEDs have been widely used in automotive lighting. However, the designs are mostly of direct backlight using arrays of LEDs with diffusive patterns above, which often causes problems such as low uniformity, glaring, and excess LEDs. Edge-lit light guide devices have been widely used in the back light models of LCD. However, the geometry of the lighting devices in the automotive lighting is often curved and non-rectangular, and the related literatures are very limited. This study addresses the design of edge-lit curved light bars and the optimization scheme for uniform light emitting. An automotive taillight with LED edge-lit light bar is used as an illustrated example. The light tracing software, TracePro is used to simulate the optical characteristics of the proposed design. 90° V-cuts are used as the optical features to distribute the light, and the lead angles of the V-cut are varied to achieve the optimum axial luminous intensity. A Fuzzy optimization scheme is proposed to manipulate the anchor spacing points which continuously varies the V-cut spacing along the light bar to satisfy the requirements of Society of Automotive Engineers (SAE) regulations and the illumination uniformity requirements. This study also proposes a solution to reduce the illuminance difference between the inner and the outer portions of the curved section of a light bar by varying bilaterial thickness of light bar cross section.

Citation Download Citation

Jyh-Cheng Yu, Jia-Hao Chen, and Shih-Chiang Liu "Design of LED edge-lit light bar for automotive taillight applications", Proc. SPIE 8835, LED-based Illumination Systems, 88350G (30 September 2013); https://doi.org/10.1117/12.2024842

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available