SESAM-modelocked electrically pumped VECSELs emitting 6.3-ps pulses

C. A. Zaugg; W. P. Pallmann; M. Mangold; I. Dahhan; M. Golling; B. W. Tilma; B. Witzigmann; U. Keller

doi:10.1117/12.2038345

3 March 2014 SESAM-modelocked electrically pumped VECSELs emitting 6.3-ps pulses

C. A. Zaugg, W. P. Pallmann, M. Mangold, I. Dahhan, M. Golling, B. W. Tilma, B. Witzigmann, U. Keller

Proceedings Volume 8966, Vertical External Cavity Surface Emitting Lasers (VECSELs) IV; 89660J (2014) https://doi.org/10.1117/12.2038345
Event: SPIE LASE, 2014, San Francisco, California, United States

Abstract

Optically pumped vertical external cavity surface emitting lasers (OP-VECSELs) evolved to high-power laser sources offering excellent beam-quality, wavelength flexibility and low-noise properties in a compact and simple cavity. Passively modelocked with a semiconductor saturable absorber mirror (SESAM), VECSELs demonstrated fs-pulses with multi-Watt average output powers at gigahertz repetition rates. Electrical pumping (EP) is an obvious step to make these semiconductor lasers even more compact and suitable for chip integration, potentially enabling access to applications such as data communication or optical clocking. With SESAMmodelocked EP-VECSELs, 57-ps pulses with an average output power of 40 mW and 9.5-ps pulses with 7.6 mW have been obtained. However, due to the intrinsic trade-off between electrical and optical properties in the design of EPVECSELs, short pulses at high average output power are difficult to achieve. This challenge was previously addressed in our theoretical guidelines for power scaling and modelocking optimization and later experimentally verified. Here, we report on the successful implementation of an improved design and fabrication scheme for EP-VECSELs, grown and fabricated at ETH Zurich. These lasers enabled a further decrease in pulse duration to 7.3 ps while increasing the average output power to 13.1 mW at 1.46-GHz repetition rate. The shortest pulse duration measured was 6.3 ps with an average power of 6.2 mW. In addition to the modelocking experiments, we present a thorough cw-characterization of our EP-VECSELs of different sizes and in different cavity configurations, pointing out the inevitable trade-off between high-power multi-mode and low-power single-mode operation limiting the modelocking performance.

Citation Download Citation

C. A. Zaugg, W. P. Pallmann, M. Mangold, I. Dahhan, M. Golling, B. W. Tilma, B. Witzigmann, and U. Keller "SESAM-modelocked electrically pumped VECSELs emitting 6.3-ps pulses", Proc. SPIE 8966, Vertical External Cavity Surface Emitting Lasers (VECSELs) IV, 89660J (3 March 2014); https://doi.org/10.1117/12.2038345

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Mode locking

Semiconductor lasers

Heatsinks

Picosecond phenomena

Quantum wells

Semiconductors

Doping

Show All Keywords

Keywords/Phrases

Search In:

Publication Years