|
MATISSE (Multi AperTure mid-Infrared SpectroScopic Experiment) will be a mid-infrared spectro-interferometer
combining the beams of up to four telescopes of the European Southern Observatory Very Large Telescope
Interferometer (ESO VLTI), providing phase closure and image reconstruction. MATISSE will produce interferometric
spectra in the LM and N band (2.8 to 13 micron).
Building the cryogenic interferometer section of an instrument like MATISSE is inherently complex. During the
preliminary design phase it became clear that this inherent complexity should not be seen as a hurdle but rather a tool; to
keep project risks low it is vital to first comprehend the complexity and second to distribute these complexities to areas
of expertise, i.e. fields of low risk.
With this approach one prevents the typical reaction of either steering away from complexity or digging narrow and deep
to find only a local solution. Complexity can be used to achieve the project goals with a reduced overall project risk. For
example two alternative options: either a complex single structure with limited interfaces or an assembly of many
simpler parts with, in total, much more interfaces. Although simpler in approach, the latter would be a burden on the
overall tolerance chain, assembly procedures, logistics & overall cost, culminating in a higher overall risk to the project;
the unintended shift of complexity and risk to a later project phase. In addition, this fragmentation would reduce the
overall grip on the project and would make it more difficult to identify showstoppers early on. And solving these
becomes exponentially more difficult in later project stages.
The integral multidisciplinary approach, earlier discussed in “MATISSE cold optics opto-mechanical design” Proc. SPIE
7734, 77341S (2010), enables optimal distribution of complexity and lowering of overall project risk. This current
proceeding presents the way in which the high level of opto-mechanical complexity and risks were distributed and dealt
with during the MATISSE Cold Optics Bench instrument development.
|
