Paper
2 June 2014 Sensing characteristics of long period gratings in hollow core fiber fabricated via electrode arc discharge
Author Affiliations +
Proceedings Volume 9157, 23rd International Conference on Optical Fibre Sensors; 91578A (2014) https://doi.org/10.1117/12.2059526
Event: OFS2014 23rd International Conference on Optical Fiber Sensors, 2014, Santander, Spain
Abstract
This paper reports on the fabrication of Long Period Gratings (LPGs) in hollow-core air-silica photonic bandgap fibers (HC-PCFs) by using pressure assisted Electrode Arc Discharge (EAD) technique. In particular, the fabrication procedure relies on the combined use of EAD step, to locally heat the HC fiber, and of a static pressure (slightly higher than the external one) inside the fiber holes, to modify the holes. Here, the experimental fabrication of LPG prototypes with different periods and lengths are discussed. And, the sensitivity of LPGs in HC-PCF to environmental parameters such as strain, temperature and static pressure are presented and discussed.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Agostino Iadicicco, A. Cutolo, and Stefania Campopiano "Sensing characteristics of long period gratings in hollow core fiber fabricated via electrode arc discharge", Proc. SPIE 9157, 23rd International Conference on Optical Fibre Sensors, 91578A (2 June 2014); https://doi.org/10.1117/12.2059526
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Electrodes

Signal attenuation

Refractive index

Fiber Bragg gratings

Fusion splicing

Single mode fibers

Back to Top