Paper
18 September 2014 Research on method for laser beam shape parameters detection
Author Affiliations +
Proceedings Volume 9282, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment; 92821H (2014) https://doi.org/10.1117/12.2068680
Event: 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2014), 2014, Harbin, China
Abstract
The laser beam quality measurement has become a hot topic in the field of laser engineering nowadays. Based on the method of Hartmann-Shack, the four-wave lateral shearing interferometer is presented in this paper to achieve the laser beam shape parameters. The principle of shearing technology is described in detail. Parameters of semiconductor laser at 532nm and ZYGO interferometer laser are tested based on the method of four-wave lateral shearing interference and their test results are compared with the nominal parameters. As the results, the test results are basically consistent with the nominal value, which fully shows the feasibility of the four-wave lateral shearing interference method.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jun-hong Su and Zhao-feng Bai "Research on method for laser beam shape parameters detection", Proc. SPIE 9282, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 92821H (18 September 2014); https://doi.org/10.1117/12.2068680
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Diffraction gratings

Optical testing

Semiconductor lasers

Sensors

Interferometry

Light sources

Back to Top