Paper
2 April 2015 A diamagnetically stabilized horizontally levitated electromagnetic vibration energy harvester
Author Affiliations +
Abstract
This article investigates a horizontal diamagnetic levitation (HDL) system for vibration energy harvesting. In this configuration, two large magnets, alias lifting magnets, are arranged co-axially at a distance such that in between them a magnet, alias floating magnet, is passively levitated at a laterally offset equilibrium position. The levitation is stabilized in the horizontal direction by two diamagnetic plates made of pyrolytic graphite placed on each side of the floating magnet. This HDL configuration permits large amplitude vibration of the floating magnet and exploits the ability to tailor the geometry to meet specific applications due to its frequency tuning capability. Theoretical modeling techniques are discussed followed by an experimental setup to validate it. At an input root mean square (RMS) acceleration of 0.0434 m/s2 (0.0044 grms) and at a resonant frequency of 1.2 Hz, the prototype generated a RMS power of 3.6 μW with an average system efficiency of 1.93%. Followed by the validation, parametric studies on the geometry of the components are undertaken to show that with the optimized parameters the efficiency can be further enhanced.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Palagummi, J. Zou, and F. G. Yuan "A diamagnetically stabilized horizontally levitated electromagnetic vibration energy harvester", Proc. SPIE 9431, Active and Passive Smart Structures and Integrated Systems 2015, 94310Q (2 April 2015); https://doi.org/10.1117/12.2077630
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fermium

Frequency modulation

Magnetism

Copper

Energy harvesting

Motion models

Bromine

Back to Top