BEaTriX, expanded x-ray beam facility for testing modular elements of telescope optics: an update

C. Pelliciari; D. Spiga; E. Bonnini; E. Buffagni; C. Ferrari; G. Pareschi; G. Tagliaferri

doi:10.1117/12.2188607

21 September 2015 BEaTriX, expanded x-ray beam facility for testing modular elements of telescope optics: an update

C. Pelliciari, D. Spiga, E. Bonnini, E. Buffagni, C. Ferrari, G. Pareschi, G. Tagliaferri

Proceedings Volume 9603, Optics for EUV, X-Ray, and Gamma-Ray Astronomy VII; 96031P (2015) https://doi.org/10.1117/12.2188607
Event: SPIE Optical Engineering + Applications, 2015, San Diego, California, United States

Abstract

We present in this paper an update on the design of BEaTriX (Beam Expander Testing X-ray facility), an X-ray apparatus to be realized at INAF/OAB and that will generate an expanded, uniform and parallel beam of soft X-rays. BEaTriX will be used to perform the functional tests of X-ray focusing modules of large X-ray optics such as those for the ATHENA X-ray observatory, using the Silicon Pore Optics (SPO) as a baseline technology, and Slumped Glass Optics (SGO) as a possible alternative. Performing the tests in X-rays provides the advantage of an in-situ, at-wavelength quality control of the optical modules produced in series by the industry, performing a selection of the modules with the best angular resolution, and, in the case of SPOs, there is also the interesting possibility to align the parabolic and the hyperbolic stacks directly under X-rays, to minimize the aberrations. However, a parallel beam with divergence below 2 arcsec is necessary in order to measure mirror elements that are expected to reach an angular resolution of about 4 arcsec, since the ATHENA requirement for the entire telescope is 5 arcsec. Such a low divergence over the typical aperture of modular optics would require an X-ray source to be located in a several kilometers long vacuum tube. In contrast, BEaTriX will be compact enough (5 m x 14 m) to be housed in a small laboratory, will produce an expanded X-ray beam 60 mm x 200 mm broad, characterized by a very low divergence (1.5 arcsec HEW), strong polarization, high uniformity, and X-ray energy selectable between 1.5 keV and 4.5 keV. In this work we describe the BEaTriX layout and show a performance simulation for the X-ray energy of 4.5 keV.

Citation Download Citation

C. Pelliciari, D. Spiga, E. Bonnini, E. Buffagni, C. Ferrari, G. Pareschi, and G. Tagliaferri "BEaTriX, expanded x-ray beam facility for testing modular elements of telescope optics: an update", Proc. SPIE 9603, Optics for EUV, X-Ray, and Gamma-Ray Astronomy VII, 96031P (21 September 2015); https://doi.org/10.1117/12.2188607

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available