Improving detector spatial resolution using pixelated scintillators with a barrier rib structure

Langechuan Liu; Minghui Lu; Wanqing Cao; Luke Peng; Arthur Chen

doi:10.1117/12.2216330

23 March 2016 Improving detector spatial resolution using pixelated scintillators with a barrier rib structure

Langechuan Liu, Minghui Lu, Wanqing Cao, Luke Peng, Arthur Chen

Proceedings Volume 9783, Medical Imaging 2016: Physics of Medical Imaging; 978315 (2016) https://doi.org/10.1117/12.2216330
Event: SPIE Medical Imaging, 2016, San Diego, California, United States

Abstract

Indirect conversion flat panel detectors (FPDs) based on amorphous silicon (a-Si) technology are widely used in digital X-ray imaging. In such FPDs a scintillator layer is used for converting X-rays into visible light photons. However, the lateral spread of these photons inside the scintillator layer reduces spatial resolution of the FPD. In this study, FPDs incorporating pixelated scintillators with a barrier rib structure were developed to limit lateral spread of light photons thereby improving spatial resolution. For the pixelated scintillator, a two-dimensional barrier rib structure was first manufactured on a substrate layer, coated with reflective materials, and filled to the rim with the scintillating material of gadolinium oxysulfide (GOS). Several scintillator samples were fabricated, with pitch size varying from 160 to 280 μm and rib height from 200 to 280 μm. The samples were directly coupled to an a-Si flat panel photodiode array with a pitch of 200 μm to convert optical photons to electronic signals. With the pixelated scintillator, the detector modulation transfer function was shown to improve significantly (by 94% at 2 cycle/mm) compared to a detector using an unstructured GOS layer. However, the prototype does show lower sensitivity due to the decrease in scintillator fill factor. The preliminary results demonstrated the feasibility of using the barrier-rib structure to improve the spatial resolution of FPDs. Such an improvement would greatly benefit nondestructive testing applications where the spatial resolution is the most important parameter. Further investigation will focus on improving the detector sensitivity and exploring its medical applications.

Citation Download Citation

Langechuan Liu, Minghui Lu, Wanqing Cao, Luke Peng, and Arthur Chen "Improving detector spatial resolution using pixelated scintillators with a barrier rib structure", Proc. SPIE 9783, Medical Imaging 2016: Physics of Medical Imaging, 978315 (23 March 2016); https://doi.org/10.1117/12.2216330

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Scintillators

Sensors

Spatial resolution

Photons

Modulation transfer functions

X-rays

Reflectivity

Show All Keywords

Keywords/Phrases

Search In:

Publication Years