Paper
26 April 1989 Responsivity Measurements Of Multimode Fiber Pigtailed Photo-Detectors And Optical Receivers
John Lim, Kenneth Li
Author Affiliations +
Abstract
Responsivity is a very important parameter in characterizing the photo-detectors and optical receivers. It is defined as the ratio of photo-current generated to the amount of optical power incident onto the photo-detector. Actual measurement of the optical power being transmitted into the pigtailing fiber is not straight forward and contributes most of the error in the responsivity measurements. In this paper, a repeatable responsivity measurement method is discussed. The essence of this method is to measure the optical power first and attempt to achieve 100% coupling between this optical source fiber and the photo-detector fiber. Using a multimode fiber for the source to couple into the multimode pigtailed photo-detector gives inconsistent measurements and the results are not repeatable. Experiments have been performed using single mode fiber as the source for responsivity measurements, the result has been found to be very consistent. This method is being used as standard operating procedure for manufacturing.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John Lim and Kenneth Li "Responsivity Measurements Of Multimode Fiber Pigtailed Photo-Detectors And Optical Receivers", Proc. SPIE 0992, Fiber Optics Reliability: Benign and Adverse Environments II, (26 April 1989); https://doi.org/10.1117/12.960059
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Multimode fibers

Receivers

PIN photodiodes

Photodiodes

Single mode fibers

Fiber optics

Reliability

Back to Top