1 January 2011 Study of electrification of extreme ultraviolet lithography mask and adhesion of particles during electrostatic chucking
Author Affiliations +
Abstract
One of the critical issues for extreme ultraviolet lithography masks is particle-free mask handling. We report that the number of particle adders on the front side of a mask in a dual pod can be reduced to less than 0.01 particles/cycle (>46-nm polystyrene latex) during the process of starting from the load port to placing an electrostatic chuck (ESC) in vacuum. In addition, we find that chucking the mask on the ESC causes serious issues. One of these issues is whether the masks will be electrically charged by chucking the ESC and whether some particles will be added on the front side. We measure the electric potential of the back and front sides of the mask and examine the particle adders. We find that when the mask is electrically floated, potential on the front side of the mask increases during ESC chucking; when the mask is released from the ESC, it is electrically charged. This electrification causes adhesion of the particles. Our experiments show that to protect the mask from particles, the mask must be grounded throughout the entire process. For electrification, we confirm that a dual-pod system is effective in protecting the mask from particles.
©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Mitsuaki Amemiya, Kazuya Ota, Takao Taguchi, and Osamu Suga "Study of electrification of extreme ultraviolet lithography mask and adhesion of particles during electrostatic chucking," Journal of Micro/Nanolithography, MEMS, and MOEMS 10(1), 013002 (1 January 2011). https://doi.org/10.1117/1.3532835
Published: 1 January 2011
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Particles

Extreme ultraviolet lithography

Dielectrics

Electrodes

Quartz

Resistance

Back to Top