Effects of plasma spatial profile on conversion efficiency of laser-produced plasma sources for EUV lithography

Ahmed Hassanein; Valeryi A. Sizyuk; Tatyana S. Sizyuk; S. S. Harilal

doi:10.1117/1.3224901

1 October 2009 Effects of plasma spatial profile on conversion efficiency of laser-produced plasma sources for EUV lithography

Ahmed Hassanein, Valeryi A. Sizyuk, Tatyana S. Sizyuk, S. S. Harilal

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 8, Issue 4, 041503 (October 2009). https://doi.org/10.1117/1.3224901

Abstract

Extreme ultraviolet (EUV) lithography devices that use laser-produced plasma (LPP), discharge-produced plasma (DPP), and hybrid devices need to be optimized to achieve sufficient brightness with minimum debris generation to support the throughput requirements of high-volume manufacturing lithography exposure tools with a long lifetime. Source performance, debris mitigation, and reflector system are all critical to efficient EUV collection and component lifetime. Enhanced integrated models continue to be developed using the High Energy Interaction with General Heterogeneous Target Systems (HEIGHTS) computer package to simulate EUV photon emission, debris generation, and transport in both single and multiple laser beam interaction systems with various targets. A new Center for Materials under Extreme Environments (CMUXE) was recently established to benchmark HEIGHTS models for various EUV-related issues. The models being developed and enhanced were used to study the effect of plasma hydrodynamics evolution on the EUV radiation emission for planar and spherical geometry of a tin target and explain the higher conversion efficiency of a planar target in comparison to a spherical target. HEIGHTS can study multiple laser beams, various target geometries, and pre-pulses to optimize EUV photon production. Recent CMUXE and other experimental results are in good agreement with HEIGHTS simulation.

©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Ahmed Hassanein, Valeryi A. Sizyuk, Tatyana S. Sizyuk, and S. S. Harilal "Effects of plasma spatial profile on conversion efficiency of laser-produced plasma sources for EUV lithography," Journal of Micro/Nanolithography, MEMS, and MOEMS 8(4), 041503 (1 October 2009). https://doi.org/10.1117/1.3224901

Published: 1 October 2009

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE