Process liability evaluation for extreme ultraviolet lithography

Hajime Aoyama; Kazuo Tawarayama; Yuusuke Tanaka; Daisuke Kawamura; Yukiyasu Arisawa; Taiga Uno; Takashi Kamo; Toshihiko Tanaka; Toshiro Itani; Hiroyuki Tanaka; Yumi Nakajima; Ryoichi Inanami; Kosuke Takai; Koji Murano; Takeshi Koshiba; Kohji Hashimoto; Ichiro Mori

doi:10.1117/1.3238542

1 October 2009 Process liability evaluation for extreme ultraviolet lithography

Hajime Aoyama, Kazuo Tawarayama, Yuusuke Tanaka, Daisuke Kawamura, Yukiyasu Arisawa, Taiga Uno, Takashi Kamo, Toshihiko Tanaka, Toshiro Itani, Hiroyuki Tanaka, Yumi Nakajima, Ryoichi Inanami, Kosuke Takai, Koji Murano, Takeshi Koshiba, Kohji Hashimoto, Ichiro Mori

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 8, Issue 4, 041508 (October 2009). https://doi.org/10.1117/1.3238542

Abstract

This work concerns the readiness of extreme ultraviolet lithography (EUVL) for high-volume manufacturing based on accelerated development in critical areas, and the construction of a process liability (PL) test site that integrates results in these areas. Overall lithography performance is determined from the performance of the exposure tool, the printability obtainable with the resist, mask fabrication with accurate critical dimension (CD) control, and correction technology for mask data preparation. The EUV1 exposure tool can carry out exposure over the full field (26 × 33 mm) at a resolution high enough for 32-nm line-and-space patterns when Selete Standard Resist 3 (SSR3) is used. The effect of flare on CD variation is a critical issue in EUVL, so flare is compensated for based on the point spread function for the projection optics of the EUV1 and aerial simulations that take resist blur into account. Production readiness of EUVL based on the integration of results in these areas is evaluated by electrical tests on low-resistance tungsten wiring. We find the PL test site to be very useful for determining where further improvements need to be made and for evaluating the production readiness of EUVL.

©(2009) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Hajime Aoyama, Kazuo Tawarayama, Yuusuke Tanaka, Daisuke Kawamura, Yukiyasu Arisawa, Taiga Uno, Takashi Kamo, Toshihiko Tanaka, Toshiro Itani, Hiroyuki Tanaka, Yumi Nakajima, Ryoichi Inanami, Kosuke Takai, Koji Murano, Takeshi Koshiba, Kohji Hashimoto, and Ichiro Mori "Process liability evaluation for extreme ultraviolet lithography," Journal of Micro/Nanolithography, MEMS, and MOEMS 8(4), 041508 (1 October 2009). https://doi.org/10.1117/1.3238542

Published: 1 October 2009

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE