1 October 1990 Performance analysis of high-power synchrotron x-ray monochromators
Ali M. Khounsary, John J. Chrzas, Dennis M. Mills, P. James Viccaro
Author Affiliations +
Abstract
Future synchrotron radiation facilities such as the Advanced Photon Source to be constructed at Argonne National Laboratory will produce dedicated and powerful beams ofx-ray radiation instrumental in advanced research in key areas of science, engineering, and medicine. The development of critical beamline optical components such as monochromators is pivotal in the successful utilization of the generated x-ray beam. The high heat load of the beam can severely distort, and thus adversely affect the performance of, such components. In this paper, a five-step numerical procedure to predict the performance of an x-ray monochromator subjected to high-power synchrotron radiation is described. The predicted performance of a model double-crystal monochromator system expressed in terms of its rocking curves satisfactorily presents the experimental results. This procedure can reliably be used in the design, evaluation, and optimization of monochromators and other optical components.
Ali M. Khounsary, John J. Chrzas, Dennis M. Mills, and P. James Viccaro "Performance analysis of high-power synchrotron x-ray monochromators," Optical Engineering 29(10), (1 October 1990). https://doi.org/10.1117/12.55723
Published: 1 October 1990
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Monochromators

Crystals

Gallium

Distortion

X-rays

Liquids

Optical components

Back to Top