1 August 1991 Extreme ultraviolet free-electron laser-based projection lithography systems
Author Affiliations +
Abstract
Free-electron laser (FEL) sources, driven by rf linear accelerators, have the potential to operate in the extreme ultraviolet (XUV) spectral range with more than sufficient average power for high-volume projection lithography. For XUV wavelengths from 100 to 4 nm, such sources will enable the resolution limit of optical projection lithography to be extended from 0.25 to 0.05 μm with an adequate total depth of focus (1 to 2 μpm). Recent developments of a photoinjector of very bright electron beams, high-precision magnetic undulators, and ring-resonator cavities raise our confidence that FEL operation below 100 nm is ready for prototype demonstration. We address the motivation for an XUV FEL source for commercial microcircuit production and its integration into a lithographic system, including reflecting reduction masks, reflecting XUV projection optics and alignment systems, and surface-imaging photoresists.
Brian Emerson Newnam "Extreme ultraviolet free-electron laser-based projection lithography systems," Optical Engineering 30(8), (1 August 1991). https://doi.org/10.1117/12.55914
Published: 1 August 1991
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications and 15 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Free electron lasers

Extreme ultraviolet

Mirrors

Projection lithography

Reflectivity

Photomasks

Lithography

Back to Top