1 August 1999 Optimizing the parameters of an optical channel for reducing the divergence of the radiated power from a surface using Monte-Carlo simulation
Farid Behazin, Mehdi N. Fesharaki, Abdolreza Nabavi, Ali Mahmoodi
Author Affiliations +
The effects of conical optical channel parameters on divergence of the rays radiated from an emitter plate are investigated. The optical channel is used to maximize the radiant power (flux) in a given solid angle at the exit aperture of the channel. A simulation method is presented for optimizing the channel layout, using channel gain (efficiency) as a measure of the output radiant power. The Monte Carlo method is employed to generate emitted rays, and ray tracing is performed in a 3-D fashion using each of the three reflection models, i.e., specular, diffuse, and Gaussian. The simulation results indicate that, for a given solid angle of output radiation, the channel gain attains a maximum for certain values of length, cone angle and two radii of the semiconical channel. Moreover, the channel length has only a scaling effect on channel gain when the cone angle and ratio of two radii are constant.
Farid Behazin, Mehdi N. Fesharaki, Abdolreza Nabavi, and Ali Mahmoodi "Optimizing the parameters of an optical channel for reducing the divergence of the radiated power from a surface using Monte-Carlo simulation," Optical Engineering 38(8), (1 August 1999). https://doi.org/10.1117/1.602192
Published: 1 August 1999
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflection

Channel projecting optics

Monte Carlo methods

Ray tracing

Geometrical optics

Mathematical modeling

Specular reflections

Back to Top