17 September 2020 Classification of the UV preionized TEA CO2 lasers based on the electrostatic parameters using the successive-over-relaxation numeric simulation method
Ahmad Mehramiz, Mojtaba Kabir, Nader Morshedian, Majid Aram, Nahid Jahanian, Ehsan Hasanpour
Author Affiliations +
Abstract

The distribution and nonuniformity of the electric field have been simulated in the active medium of CO2 laser using successive-over-relaxation numeric method. The different configurations of UV preionization have been considered as spark array, surface corona, plasma cathode, and sliding discharge. The electric field distribution and field deviation (FD) is compared in various configurations to obtain an insight into the electrical field uniformity. The numerical simulation results show that the minimum FD is related to the plasma cathode and sliding discharge configurations regarding boundary conditions. For the sliding configuration, a slight increase in the FD was observed in comparison with plasma cathode. The FD of surface corona configuration is about two percent lower than the spark array.

© 2020 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2020/$28.00 © 2020 SPIE
Ahmad Mehramiz, Mojtaba Kabir, Nader Morshedian, Majid Aram, Nahid Jahanian, and Ehsan Hasanpour "Classification of the UV preionized TEA CO2 lasers based on the electrostatic parameters using the successive-over-relaxation numeric simulation method," Optical Engineering 59(9), 095106 (17 September 2020). https://doi.org/10.1117/1.OE.59.9.095106
Received: 6 March 2020; Accepted: 1 September 2020; Published: 17 September 2020
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Plasma

Gas lasers

Electrodes

Ultraviolet radiation

Carbon monoxide

Computer simulations

Glasses

Back to Top