The use of composite materials has seen widespread adoption in modern aerospace industry. This has been facilitated due to their combined favorable mechanical characteristics, namely leveraging their low weight, high stiffness and increased strength. Wide adoption of composites requires an effort to avoid costly and cumbersome autoclave-based manufacturing processes. The up and coming “out-of-autoclave” composite manufacture processes also have to be optimized, to allow for consistent high quality of the parts produced as well as keeping the cost and production speed as low as possible. This optimisation can be achieved offline as well as by trying to have constant monitoring and controlling the resin injection and curing cycles.
Capitalizing on the benefits of Silicon Photonic Integrated Circuits (PICs), namely the fast response, miniature size, ability to operate at high temperatures, immunity to electromagnetic interference (allowing carbon fibers in composites), and their compatibility with CMOS fabrication techniques, a passive PIC based temperature sensor embedded in a composite tool is demonstrated, used to produce RTM-6 composite parts.
The design and development methodology of the PIC based sensor (fabricated in an Multi Project Wafer run of 220 nm Silicon-on-Insulator (SOI) platform and based on periodic Bragg grating elements) as well as the experimental results and comparison with the industry standard thermocouples, during a thermal cycling of the tool are presented. We measured the embedded PIC temperature sensor to have sensitivity of around ~85 pm/°C, while the RTM-6 fabrication cycle requires the tool to operate up to 185°C.
We demonstrate a sensing platform for composite manufacturing (RTM-6) process based on silicon photonics, being controlled by novel Process Monitoring Optimization Control (PMOC) system. The photonic multi-sensor is based on bragg grating components, allowing measurements of temperature, pressure and refractive index, and is packaged employing a ball lens fiber-to-chip interface. We present results of the packaged temperature photonic sensor regarding bandwidth, linearity and thermo-optic efficiency, being controlled by our PMOC system. We experimentally achieve 0.074 nm/C with R^2 = 0.995 linearity for temperature up to 180°C (RTM-6 compatible) with 1 kHz data acquisition and 0.2°C accuracy.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.