This will count as one of your downloads.
You will have access to both the presentation and article (if available).
Because the stretched-pulse duration is of the order of hundreds of picoseconds, the DPA delay is induced using a freespace interferometer with reasonable arm lengths of few tens of centimeters. The use of a common interferometer to divide and recombine temporal pulse replicas, together with the Sagnac geometry, results in an identical optical path for all four replicas. Therefore, the whole spatio-temporal combining architecture is passive, avoiding the need for active electronic stabilization systems. Because we only use two temporal replicas, the system is immune to differential saturation levels or B-integrals between successive pulses: this is compensated by controlling the amplitude of both pulses at the input of the amplifying setup.
This setup allows the generation of 1 mJ, 300 fs compressed pulses at 50 kHz repetition rate, corresponding to 50 W output average power, with a combining efficiency above 90% at all power levels.
View contact details
No SPIE Account? Create one
